Products - Rubber Chemicals Division

Products

ACCELERATOR

S - Cure TMT

Product Identification: Tetre methyl thiuram disulphide
Supply Form: White to greyish

Product Characteristics

Test Nominal Value Unit
Initial melting point min. 146.0 Deg C
Final melting point max. 160.0 Deg C
Assay min. 96.0 %
Ash content max. 0.3 %
Volatile matter max. 0.3 %
Sieve residue (0.063 mm) max 0.3 %

Additional Information

Test Typical Value Unit
Density 1.4 gm/cc

Soluble: Soluble in acetone, partially souble in naptha and primary alcohol and insoluble in water
[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

S - Cure CBS

Product Identification: Benzothiazyl-2-cyclothexyl sulphenamide
Supply Form: S-Cure CBS - Greyish white powder, S-Cure CBS/P - Greyish white powder

Product Characteristics

Test Nominal Value Unit
Initial melting point min. 98.0 Deg C
Final melting point max. 107.0 Deg C
Assay min. 95.0 %
Ash content max. 0.3  
Volatile matter max. 0.3 %
Insoluble in methanol max 0.5  
Free amine max. 0.4  

Additional Information

Test Typical Value Unit
Density 1.3 gm/cc

Particular Features

Storage Keep cool and in dry condition
Packaging 20 Kg. paper bags with inside liner and outer plastic liner

[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

S - Cure ZMBT

Product Identification:Zink Salt of 2-mercaptobenzothiazole
Supply Form:Yellowish white powder.

Product Characteristics

Test Nominal Value Unit
Zinc content 17.0 +/- 1.0 %
Volatile matter max. 0.3 %
Sieve residue (0.063 mm) max. 0.5 %
Free MBT 13.5 +/- 2.5 %

Additional Information

Test Typical Value Unit
Density 1.7 gm/cc

[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

S - Cure F

Product Identification: Combination of dibenzothiazyl disulphide with basic accelerators.
Supply Form:Creamish yellow coloured powder

Product Characteristics

Test Nominal Value Unit
Assay DPG content 13.0 +/- 1.0
HMT content 15.0 +/- 1.0
%
Free MBT ---- %
Ash content max 1.0 %
Volatile matter max. 0.3 %

Additional Information

Test Typical Value Unit
Density 1.4 gm/cc

Particular Features

Storage Keep cool and in dry condition
Packaging 20 Kg. paper bags with inside liner and outer plastic liner

[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

S - Cure ZDC

Product Identification: Zinc diethyl dithiocarbamate
Supply Form:White to yellowish powder

Product Characteristics

Test Nominal Value Unit
Initial melting point min. 175.0 Deg C
Final melting point max. 185.0 Deg C
Assay min. 97.0 %
Ash content max. 0.3 %
Volatile matter max. 0.3 %

Additional Information

Test Typical Value Unit
Density 1.49 gm/cc

Particular Features

Storage Keep cool and in dry condition
Packaging 20 Kg. paper bags with inside liner and outer plastic liner

[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

S - Cure MBT

Product Identification:2- mercaptobenzothiazole (MBT)
Supply Form: Yellowish - white power

Product Characteristics

Test Nominal Value Unit
Initial melting point min. 174.0 Deg C
Final melting point max. 184.0 Deg C
Assay min. 94.0 %
Ash content max. 0.6 %
Volatile matter max. 0.3 %
Sieve residue ( 0.063 mm) max 0.1 %

Additional Information

Test Typical Value Unit
Density 1.5 gm/cc

Particular Features

Storage Soluble in acetone and dilute alkali, partially soluble in alcohol and insoluble in water.

[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

S - Cure MBTS

Product Identification:Dibenzothiazy disulphide
Supply Form: Creame coloured power

Product Characteristics

Test Nominal Value Unit
Initial melting point min.168.0 Deg C
Final melting point max. 183.0 Deg C
Assay min. 95.0 %
Free MBT max. 1.0 %
Ash content max. 0.6 %
Volatile matter max 0.3 %
Sieve residue ( 0.063 mm) max. 0.1 %

Additional Information

Test Typical Value Unit
Density 1.5 gm/cc

Particular Features

Storage Keep cool and in dry condition
Packaging 20 Kg. paper bags with inside liner and outer plastic liner

[These raw material properties are typical properties and unless specifically indicated otherwise, are not to be considered as delivery specification.]

Top