It’s a buying division of Ace Chemie Zynk Energy Limited and we make purchases of ZINC as below:
Zinc Metal / Zinc Ingots:
- Special High Grade 99.995% Min.
- High Grade 99.95% Min.
- Zinc Metal 99.50% Min.
Secondary Zinc (As Per ISRI):
SCRUB-HOT DIP GALVANIZERS SLAB ZINC DROSS (Batch Process)
- Minimum Zinc content 92%, Free of skimming and tramp iron.
- Broken pieces under 2" in diameter shall not exceed 10% of the weight of each shipment.
- Heavier pieces acceptable upon mutual agreement between buyer and seller.
- Blocks are acceptable upon mutual agreement.
SEAL-CONTINUOUS LINE GALVANIZING SLAB ZINC TOP DROSS
- Minimum Zinc Content 90%, Free of skimming.
- Broken pieces under 2" in diameter shall not exceed 10% of the weight of each shipment.
- Heavier pieces acceptable upon mutual agreement between buyer and seller.
SEAM-CONTINUOUS LINE GALVANIZING SLAB ZINC BOTTOM DROSS
- Minimum Zinc Content 92%, Free of skimmings.
- Broken pieces under 2" in diameter shall not exceed 10% of the weight of each shipment.
- Heavier pieces acceptable upon mutual agreement between buyer and seller.
SCORE-OLD SCRAP ZINC
- Consists of clean dry scrap zinc, such as sheets, jar lids, clean unalloyed castings
and anti-corrosion plates.
- Borings and turnings are not acceptable.
- Material must not be excessively corroded or oxidized.
- All foreign attachments and extraneous materials are deductible.
SHELF-PRIME ZINC DIE CAST DROSS
- Shall consist of metal skimmed from the top of pot of molten zinc die cast metal.
- Must be unsweated, unfluxed, shiny, smooth, metallic and free from corrosion or
oxidation.
- Zinc shall be minimum of 85%.
BATTERY TRIMMINGS
- Zinc content should be 99% minimum.
- Should be in the form of bales/briquettes or packed loose in jumbo bags.
ZINC ANODES
- Shall consist of 99.9% Zinc with embedded steel bars.
Notes:
- Sizes may vary from Small Slabs weighing 20 kgs. to Jumbo Blocks weighing upto 1500
kgs.
- Mention the Lead, Iron, Aluminium and Cadmium content along with your offers for
our information.
